Part Number |
Part |
Weight |
Cost |
1012 |
SENSITIVE DRILLING ATTACHMENTThreads onto mill spindle. Spring loaded 5/32" chuck is pulled down by hand
using a bearing supported knurled collar. Provides quick action and great "feel" when drilling small
holes. |
0.91kg
2lbs |
£138.80 |
1074 |
STEADY RESTSupports the end of long work for center drilling |
0.34kg
0.75lbs |
£50.40 |
1090 |
FOLLOWER RESTSupports thin work, keeps it from deflecting away from the cutter, moves with the lathe
saddle to "follow" the work |
0.34kg
0.75lbs |
£88.20 |
1160 |
WW COLLET SETP/N 1161 included in set. Collets are like small, individually sized chucks for holding a
specific diameter tool or material. WW collets have a hole through the collet and drawbar to accept long
material. Traditionally used by watch and clock makers. Sherline WW collets have a .312-.313 body size and
.275-40 thread. |
0.23kg
0.5lbs |
£113.50 |
116000 |
WW COLLET BLANK, Large Head |
0.02kg
0.05lbs |
£14.10 |
116000 + size |
WW COLLET, CUSTOM SIZECustom size collets can be ordered in sizes from .050" to .320" or 1.28 mm to 8.13
mm. For example, a custom collet might be ordered as 116000 .100" or 116000 2.75 mm.) Custom collets are
not laser engraved with size information. Allow 3 weeks for delivery. |
0.02kg
0.05lbs |
£50.40 |
1160001 |
WW COLLET BLANK, Small Head |
0.02kg
0.05lbs |
£14.10 |
116001 |
1/64″ WW COLLET |
0.02kg
0.05lbs |
£50.40 |
116002 |
1/32″ WW COLLET |
0.02kg
0.05lbs |
£40.70 |
116003 |
3/64″ WW COLLET |
0.02kg
0.05lbs |
£26.90 |
116004 - 116020 |
WW COLLETS from size 1/16″ to 5/16″ by 64ths.The part number is given as 1160__ plus the number of 64ths
to denote size. For example, 13/64" is P/N 116013 and a 1/4" collet (16/64") is P/N 116016. |
0.02kg
0.05lbs |
£21.70 |
1161 |
WW COLLET ADAPTER & DRAWBARIncluded in collet set. Adapts WW taper to #1 Morse taper of Headstock
|
0.23kg
0.5lbs |
£63.20 |
1162 |
DELUXE WW COLLET SET (Inch)17 collets, adapter, drawbar, pot chucks, knockout bar, etc. in wooden case
|
1.36kg
3lbs |
£346.60 |
1163 |
8.0 MM COLLET ADAPTER & DRAWBARWW collets vary somewhat depending on manufacturer. This adapter
holds those with a .314-.315 body size |
0.23kg
0.5lbs |
£69.40 |
1164 |
WW COLLET FIXTUREAllows WW collets with .312-.313 body to be held on face of rotary table or mill table.
|
0.45kg
1lbs |
£132.50 |
1165 |
8.0 MM COLLET FIXTUREAllows WW collets with .314-.315 body to be held on face of rotary table or mill
table. |
0.45kg
1lbs |
£145.00 |
1170 |
OAK WW COLLET STORAGE BOXA high quality storage box that holds up to 22 WW collets plus collet pot
chucks, drawbar, knockout bar and WW collet adapter. Beveled corners, brass hardware, satin lacquer
finish. |
0.45kg
1lbs |
£37.90 |
1171 |
OAK WW COLLET STORAGE BOXA high quality storage box that holds up to 96 WW collets. Beveled corners,
brass hardware, oak insert with 96 holes, satin lacquer finish. |
0.45kg
1lbs |
£44.10 |
117803 |
.3 mm WW COLLET |
0.02kg
0.05lbs |
£50.40 |
117804 |
.4 mm WW COLLET |
0.02kg
0.05lbs |
£50.40 |
117805 - 117808 |
WW COLLETS from size .5mm through .8 mm by .1 mm increments.The Part number is given as 11780 plus the
collet size in .1 mm. For example, a .6 mm collet would be P/N 117806 |
0.02kg
0.05lbs |
£50.40 |
117809 - 117814 |
WW COLLETS from size .9mm through 1.4 mm by .1 mm increments.The part number is given as 11780_ or
1178__ plus the collet size in .1 mm. For example, a 1.1 mm collet would be P/N 117811. |
0.02kg
0.05lbs |
£40.70 |
117815 - 117880 |
WW COLLETS from size 1.5 mm through 8.0 mm by .1 mm increments.The part number is given as 1178__ plus
the collet size in .1 mm. For example, a 6.4 mm collet would be P/N 117864. |
0.02kg
0.05lbs |
£21.70 |
1179 |
DELUXE WW COLLET SET (Metric)14 collets, pot chucks, etc. in wooden case. P/N 1161 included in set |
1.36kg
3lbs |
£308.80 |
1180 |
COMPLETE METRIC WW COLLET SETThe set is contained in a P/N 1171 oak collet box with 96-hole oak insert.
|
1.82kg
4lbs |
£1,178.20 |
1182 |
BULLNOSE LIVE CENTERSupports tubing or stock with a large end hole when turning between centers. Dual
preloaded bearings. |
0.34kg
0.75lbs |
£101.30 |
1185 |
VERTICAL MILLING TABLEMounts to lathe or mill table to move work up and down. Has 2.25" of vertical
travel and 8" long table. |
1.14kg
2.5lbs |
£151.30 |
1187 |
CHUCK-TO-T-SLOT ADAPTERAllows 3- or 4-jaw chuck to be quickly screwed to mill table. |
0.03kg
0.06lbs |
£9.70 |
1191 |
LIVE CENTERBall bearings allow center to rotate with part to reduce friction when turning between
centers |
0.11kg
0.25lbs |
£50.40 |
1201 |
ADJUSTABLE LIVE CENTERBall bearing live center adjusts for perfect centering of headstock and tailstock
|
0.23kg
0.5lbs |
£81.90 |
1202 |
ADJUST. TAILSTOCK CHUCK ARBORAllows perfect centering of tailstock chuck in relation to headstock |
0.23kg
0.5lbs |
£56.90 |
1203 |
ADJUST. TAILSTOCK TOOL HOLDERAllows perfect centering of round tools held in tailstock |
0.23kg
0.5lbs |
£56.90 |
1206 |
ADJUST. TAILSTOCK 1″ DIE HOLDER w/ 13/16″ bushingAllows perfect centering of 1" or 13/16" threading dies
|
0.23kg
0.5lbs |
£75.70 |
1220 |
TAILSTOCK SPINDLE EXTENDERDesigned for lathes built before July, 1996 to extend reach of tailstock
spindle over table. Not needed on newer lathes |
0.23kg
0.5lbs |
£50.40 |
1230 |
#0 MORSE ARBOR TO 3/4-16 CHUCK THREAD ADAPTERAllows a 3- or 4-jaw chuck to be mounted on the tailstock
spindle |
0.23kg
0.5lbs |
£50.40 |
1270 |
COMPOUND SLIDERedesigned, Replaces P/N 1080. An alternate and more traditional way of turning tapers
|
0.45kg
1lbs |
£157.50 |
1272 |
COMPOUND SLIDE RISER BLOCKRaises compound slide about 1" for use on front side of crosslide with riser
blocks in place on lathe |
0.23kg
0.5lbs |
£44.10 |
1288 |
RISER ROCKER TOOL POSTTaller tool post for use with riser blocks in place on the lathe |
0.23kg
0.5lbs |
£50.40 |
1289 |
RISER 3/8″ INSERT TOOL POSTTaller tool post for holding 3/8" shank tools with riser blocks in place on
the lathe. |
0.23kg
0.5lbs |
£50.40 |
1290 |
STEADY REST RISERLifts steady rest to match headstock when spacer block is in place. Used mainly by
those who leave spacer blocks in place at all times on their lathe. |
0.11kg
0.25lbs |
£63.20 |
1291 |
SPACER BLOCK KITLifts headstock 1.25" to allow parts up to 6" diameter to be turned. Includes extended
riser rocker tool post |
0.68kg
1.5lbs |
£88.20 |
1292 |
TAILSTOCK RISER BLOCKLifts tailstock 1.25" for turning between centers with headstock riser block in
place |
0.45kg
1lbs |
£63.20 |
1296 |
CUTOFF TOOL HOLDER RISER BLOCKLifts cutoff tool P/N 3002 for use with riser blocks in place. Used with
tool upside down on back side of crosslide table. |
0.23kg
0.5lbs |
£63.20 |
1297 |
MILL HEADSTOCK SPACER BLOCKSame as riser block for lathe, but without tool post. Adds 1.25" of throat
distance when milling |
0.34kg
0.75lbs |
£56.60 |
1300 |
MILL COLUMN SPACER BLOCKRaises column base 2" for greater Z-axis clearance. Includes longer bolts for
mounting. |
0.68kg
1.5lbs |
£50.40 |
2045 |
HEX AND OCTAGON INDEX BLOCK SETFits in mill vise to allow simple indexing of 2, 3, 4, 6 or 8 sides or
hole patterns |
0.91kg
2lbs |
£75.70 |
2049 |
SPINDLE HANDWHEELUsed to rotate the headstock spindle much like the large handwheel on a sewing machine
is used |
0.68kg
1.5lbs |
£56.60 |
2083 |
WW COLLET 1″ BLANKMake your own custom tool holder or collet that is held with the WW adapter and
drawbar |
0.03kg
0.06lbs |
£37.90 |
2085 |
WW COLLET TAILSTOCK ADAPTERUse with P/N 1203) (Allows WW collets to be held in the tailstock |
0.11kg
0.25lbs |
£69.10 |
2086 |
8mm COLLET TAILSTOCK ADAPTERUse with P/N 1203 |
0.11kg
0.25lbs |
£75.70 |
2090 |
8.0mm COLLET TO 3/4-16 THREADFor mounting Sherline chuck on watchmaker's or jeweler's lathe that takes
8.0mm collets |
0.23kg
0.5lbs |
£50.40 |
2091 |
10mm “D” COLLET TO 3/4-16 THREADFor mounting Sherline chuck on watchmaker's or jeweler's lathe that
takes 10mm D collets, not for use on Sherline lathe. |
0.23kg
0.5lbs |
£56.60 |
2092 |
8.0mm COLLET TO 3/8-24 THREADFor mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe
that takes 8.0mm collets, not for use on Sherline lathe. |
0.23kg
0.5lbs |
£50.40 |
2093 |
10.0mm COLLET TO 3/8-24 THREADFor mounting chuck with 3/8-24 thread on watchmaker's or jeweler's lathe
that takes 10mm D collets, not for use on Sherline lathe. |
0.23kg
0.5lbs |
£56.60 |
2094 |
CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to Morse #1Arbor for use on watchmaker or jeweler's lathes to
hold round gear cutter, Not for use on Sherline lathe |
0.23kg
0.5lbs |
£75.70 |
2095 |
CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 10mm “D” ColletArbor for use on watchmaker's or jeweler's
lathes to hold round gear cutter. not for use on Sherline lathe |
0.23kg
0.5lbs |
£75.70 |
2096 |
CLOCKMAKER’S GEAR CUTTING ARBOR, 7.0mm to 8.0 mm WW ColletArbor for use on watchmaker's or jeweler's
lathes to hold round gear cutter, not for use on Sherline lathe |
0.23kg
0.5lbs |
£75.70 |
2100 |
WW 3/4″ COLLET POT CHUCKCollet pot chucks are like small chucks custom turned to hold a particular part.
The part is held in a depression turned in the surface of the pot chuck and does not go all the way
through. Includes dowel pin to clamp on while turning to size. |
0.03kg
0.06lbs |
£31.60 |
2101 |
WW 1″ COLLET POT CHUCKSee 2100 |
0.03kg
0.06lbs |
£34.10 |
2102 |
WW 1-1/4″ COLLET POT CHUCKSee 2100 |
0.03kg
0.06lbs |
£37.90 |
2103 |
10mm 3/4″ COLLET POT CHUCKNot for use on Sherline lathe |
0.05kg
0.12lbs |
£44.10 |
2104 |
10mm 1″ COLLET POT CHUCKNot for use on Sherline lathe |
0.05kg
0.12lbs |
£50.40 |
2105 |
10mm 1-1/4″ COLLET POT CHUCKNot for use on Sherline lathe |
0.05kg
0.12lbs |
£56.60 |
2106 |
LIVE CENTER-TO-8mm COLLETA live center for watchmaker's or jeweler's lathes. |
0.11kg
0.25lbs |
£94.40 |
2107 |
LIVE CENTER-TO-10mm COLLETA live center for watchmaker's or jeweler's lathes. |
0.11kg
0.25lbs |
£94.40 |
2110 |
W.R. SMITH WATCHMAKER’S T-RESTUsed on Sherline lathes to support a hand-held "graver", a traditional
watchmaker's tool. Turns Sherline lathe into a first class watch or clock maker's lathe. Designed by famed
craftsman W.R. Smith. Graver-making instructions included. |
0.45kg
1lbs |
£251.90 |
2200 |
RADIUS CUTTING ATTACHMENTFor cutting ball ends, convex and concave radii on ends of parts and even
complete balls |
0.45kg
1lbs |
£151.30 |
2250 |
QUICK CHANGE TOOL POST w/ 3 holdersSaves time when changing tools. Holders included for 1/4" cutter,
round boring tool and cutoff tool. Cutting tools not included. |
1.36kg
3lbs |
£327.50 |
2251 |
QUICK CHANGE TOOL POST RISERBrings quick-change tool post up to proper centerline height when using a
riser block under the headstock for cutting larger diameters. |
0.8kg
1.75lbs |
£63.20 |
2256 |
RIGHT-HAND 35° CARBIDE INSERT TOOL HOLDER (Includes one 55° insert)Use in 7600 tool post. Carbide is
used to cut hard-to-machine materials like stainless steel |
0.11kg
0.25lbs |
£56.60 |
2257 |
LEFT-HAND 35° CARBIDE INSERT TOOL HOLDERIncludes one 55° insert) (Use in 7600 tool post. Carbide is used
to cut hard-to-machine materials like stainless steel |
0.11kg
0.25lbs |
£56.60 |
2258 |
PAIR OF RIGHT- and LEFT-HAND 35° INSERT TOOL HOLDERSIncludes one 55° insert per holder) (Replacement
inserts, P/N 7605) (Save £19.50 by buying both LH and RH tools together |
0.23kg
0.5lbs |
£88.20 |
2259 |
80° INSERT 3/8″ ROUND BORING TOOL, 1/2″ min. hole, carbide insert includedUse w/ P/N 7600 tool post |
0.07kg
0.15lbs |
£75.70 |
2260 |
55° INSERT 3/8″ ROUND BORING TOOL, 3/4″ min. hole, carbide insert includedUse w/ P/N 7600 tool post |
0.07kg
0.15lbs |
£75.70 |
2261 |
PAIR OF 80° (P/N 2259) AND 55° (P/N 2260) 3/8″ ROUND BORING TOOLS w/ inserts |
0.11kg
0.25lbs |
£119.70 |
2280 |
1/4″ QUICK-CHANGE TOOL BIT HOLDER (Incl. w/ 2250) |
0.45kg
1lbs |
£75.70 |
2285 |
3/8″ QUICK-CHANGE BORING TOOL HOLDER (Incl. w/ 2250) |
0.45kg
1lbs |
£75.70 |
2290 |
QUICK-CHANGE CUTOFF TOOL HOLDER (Incl. w/ 2250) |
0.45kg
1lbs |
£100.70 |
2295 |
CARBIDE INSERT HOLDER for QUICK-CHANGE TOOL POST |
0.45kg
1lbs |
£113.50 |
3001 |
POWER FEED (120V.) (for 240V. see P/N 3011)Single direction motor drives lathe leadscrew .9" per minute
to provide smooth final cut on long parts. Not designed for use with thread cutting attachment. |
2.27kg
5lbs |
£113.50 |
3002 |
CUTOFF TOOL & HOLDERFor cutting off work piece from the raw stock from which it was turned. Often
called a "parting tool". |
0.11kg
0.25lbs |
£63.20 |
3003 |
TWO-POSITION TOOL POSTHolds two 1/4" cutting tools for quicker tool changes |
0.11kg
0.25lbs |
£20.40 |
3004 |
KNURLING TOOL HOLDERMakes knurled finishes. Includes one set of spiral knurls. Other sizes and patterns
available |
0.11kg
0.25lbs |
£94.40 |
3005 |
1/4″ SQ. HIGH SPEED STEEL TOOL BLANKSharpen yourself on a bench grinder for standard or custom-shaped
tools |
0.03kg
0.06lbs |
£4.10 |
3006 |
CARBIDE TOOL SET (3 PC) (LH, RH, 60° THREADING)Carbide tips are brazed to 1/4" tool shanks. For cutting
hard materials |
0.17kg
0.38lbs |
£25.40 |
3007 |
HIGH SPEED STEEL TOOL SET (3 PC) (LH, RH, BORING)Pre-sharpened to save you time. For cutting most
materials |
0.05kg
0.12lbs |
£31.60 |
3008 |
TWO-POSITION TOOL POST, 5/16″ – 3/8″Holds 5/16" tool on one side, 3/8" on other side. Allows use of
tools other than 1/4" |
0.11kg
0.25lbs |
£31.60 |
3009 |
CUTTING TOOL HEIGHT GAUGEUsed to assure tool tip on resharpened tools is set to proper centerline
height. Works with both regular or riser toolpost |
0.11kg
0.25lbs |
£25.40 |
3011 |
POWER FEED (240V)See P/N 3001 |
2.27kg
5lbs |
£128.50 |
3012 |
HOLD-DOWN SETSimple strap clamp set for clamping parts to table for milling. Includes 2 clamps, T-nuts
and assorted length bolts |
0.17kg
0.38lbs |
£31.60 |
3013 |
STEP BLOCK HOLD-DOWN SETThis is a smaller version of the sets used on most full-size mills. Quicker to
use than 3012 and holds larger parts. Stepped blocks interlock to adjust height quickly. Spare block
included to be cut to custom sizes |
0.45kg
1lbs |
£50.40 |
3015 |
TOGGLE SWITCH DUST SEALUse to keep fine dust out of speed contorl on/off switch when cutting brass or
wood |
0.03kg
0.06lbs |
£11.00 |
3016 |
CUTOFF TOOL REAR MOUNTING BLOCKAllows 3002 cutoff tool to be mounted on "back" side of crosslide where
it is out of the way and can be left in place for easy parting off. Cutoff blade mounts upside down for
use in this position |
0.05kg
0.12lbs |
£19.10 |
3017 |
CROSSLIDE ACCESSORY PLATEStrengthens and protects lathe table when used for milling with vertical
milling column. Not for use during lathe operations as tool post height will be incorrect. |
0.45kg
1lbs |
£50.40 |
3018 |
REAR MOUNT CUTOFF TOOL AND HOLDER |
0.11kg
0.25lbs |
£63.20 |
3020 |
SHERLINE “T” DRIVER5/32" hex driver with T-handle adjusts majority of 10-32 screws on Sherline tool.
Easy to find on your bench. |
0.05kg
0.12lbs |
£7.90 |
3021 |
CENTER DRILL SET (3 PC., #1, #2, #3 double-ended)Center drills don't wander off center when starting
holes. 60° tip makes proper hole to match dead or live center tips for turning between centers |
0.03kg
0.06lbs |
£20.40 |
3035 |
SPUR DRIVERA quick way to drive wood parts when turning between centers. |
0.11kg
0.25lbs |
£31.60 |
3038 |
WOOD TOOL REST (3″ & 5″ REST)Supports hand-held wood cutting tools for wood turning |
0.34kg
0.75lbs |
£69.40 |
3047 |
EXTENDED WOOD TOOL REST SET (For use w/ 1291)Like 3038 only with longer shafts to match height of
headstock with riser block in place |
0.11kg
0.25lbs |
£75.70 |
3050 |
VERTICAL MILLING COLUMNConverts your lathe into a 3-axis mill in less than 30 seconds. |
3.64kg
8lbs |
£189.10 |
3050-CNC |
VERTICAL MILLING COLUMN, CNC READYConverts lathe into a 3-axis mill. Stepper motor mount is ready to
accept NEMA 23 frame size stepper motor for CNC control |
4.09kg
9lbs |
£316.30 |
3052 |
FLY CUTTERFor quickly milling large, flat surfaces. |
0.23kg
0.5lbs |
£44.10 |
3054 |
BORING HEADFor enlarging holes to a precise inside diameter, uses 3/8" round boring tools |
0.23kg
0.5lbs |
£88.20 |
3055 |
MORSE #1 BLANKTurn on lathe and/or mill slots to make your own custom fly cutter, slitting saw holder or
special tool holder |
0.23kg
0.5lbs |
£20.40 |
3056 |
T-NUTS, 10/32 (Set of 10) |
0.03kg
0.06lbs |
£10.40 |
3057 |
ROCKER TOOL POSTRocking insert with two screws allows adjustment of tool tip height for accurate
turning. Eliminates shimming. Included on Model 4400/4410 lathes |
0.11kg
0.25lbs |
£37.90 |
3058 |
4-JAW HOLD DOWN SETTwo angle clamps with T-nuts to clamp 4-jaw vise to any position on mill table.
Included with 3551 mill vise |
0.05kg
0.12lbs |
£7.90 |
3060 |
MILLING COLLET SET (3 PC)(1/8", 3/16", 1/4") Milling collets have a #1 Morse taper and are pulled into
the headstock with a drawbolt. They do not have a through hole like WW collets. They are used to hold
specific size end mills or cutters. |
0.05kg
0.12lbs |
£56.90 |
3061 |
BORING TOOL—Max. Depth .600, Min. Hole 1/4″)Use w/ P/N 3054 boring head |
0.05kg
0.12lbs |
£19.10 |
3063 |
BORING TOOL—Max. Depth 1″, Min. Hole 5/16″Use with P/N 3054 boring head |
0.05kg
0.12lbs |
£19.10 |
3064 |
BORING TOOL—Max. Depth 1.5″, Min. Hole 5/16″Use w/ 3054 boring head |
0.05kg
0.12lbs |
£22.90 |
3065 |
SLITTING SAW HOLDERHolds small, round sawblades for cutting thin slots |
0.11kg
0.25lbs |
£50.70 |
3070 |
2.5″ Dia. x 1-5/16″ STEEL BLANK (Chuck body) w/ 3/4-16 threadA billet of 12L14 steel threaded for the
Sherline spindle, ready to turn it into whatever tool or part you need. A blank canvas for machinists.
|
0.91kg
2lbs |
£31.60 |
3074 |
Tool holder for 1/4″ or 3/8″ Jacobs drill chucks3/4-16 female thread to 3/8-24 male thread adapter
replaces #1 Morse arbor to allow drill chucks to be threaded on to outside thread of spindle to speed up
tool changes on CNC machines. No variation in drill length when changing tools back and forth. Cannot be
used with 5/32" Jacobs chucks as they do not have a threaded back. |
0.23kg
0.5lbs |
£44.10 |
3075 |
5/16″ END MILL HOLDER |
0.23kg
0.5lbs |
£37.90 |
3076 |
6.0mm END MILL HOLDER |
0.23kg
0.5lbs |
£37.90 |
3077 |
8.0mm END MILL HOLDER |
0.23kg
0.5lbs |
£37.90 |
3078 |
10.0MM END MILL HOLDERMost common size metric tool holder |
0.23kg
0.5lbs |
£37.90 |
3079 |
3/8″ END MILL HOLDERMost common size inch tool holder. 3/8" end mills are available from many sources
and are, therefore, the least expensive and available in the largest selection. |
0.23kg
0.5lbs |
£37.90 |
3080 |
END MILL SET (1/4″ SHK) (1/8″, 3/16″, 1/4″) |
0.03kg
0.06lbs |
£37.90 |
3087 |
3/32″ MILL COLLET |
0.03kg
0.06lbs |
£25.40 |
3089 |
5/32″ MILL COLLET |
0.03kg
0.06lbs |
£25.40 |
3090 |
3-PC. METRIC MILL COLLET SET w/ 3.0, 4.0 and 6.0 mm colletsSee P/N 3060 for inch version set and
description. |
0.07kg
0.15lbs |
£56.90 |
3091 |
7/32″ MILL COLLET |
0.03kg
0.06lbs |
£25.40 |
3092 |
3.0MM MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3093 |
4.0MM MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3094 |
6.0MM MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3095 |
1/8″ MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3096 |
3/16″ MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3097 |
1/4″ MILL COLLET |
0.03kg
0.06lbs |
£20.70 |
3098 |
MILL COLLET (Special Order .125 to .312)Allow 3 weeks delivery |
0.03kg
0.06lbs |
£63.20 |
3100 |
THREAD-CUTTING ATTACHMENTBeing able to cut threads on your lathe frees you from the expense of
purchasing a lot of expensive taps and dies for non-standard size threads. Cut just about any thread, inch
or metric, using this set of change gears. Hand crank wheel included |
1.36kg
3lbs |
£157.50 |
3200 |
INDEXING ATTACHMENTIndexes in 5° increments, uses rack gear to turn rotation into measurable linear
movement for divisions other than 5° multiples. Includes base and tailstock. |
3.64kg
8lbs |
£251.90 |
3217 |
GEAR TOOTH CUTTER HOLDER & HSS BLANKGrind gear shape into tool blank and use on mill in conjunction
with indexing attachment or rotary table to cut your own gears. |
0.23kg
0.5lbs |
£44.10 |
3230 |
MILL ARBOR-7/8″ DIA. (Short)Holds round mill cutters |
0.23kg
0.5lbs |
£63.20 |
3231 |
MILL ARBOR-7/8″ DIA. (Long)Holds round mill cutters |
0.23kg
0.5lbs |
£63.20 |
3235 |
MILL ARBOR-1″ DIA. (Short)Holds round mill cutters |
0.23kg
0.5lbs |
£63.20 |
3236 |
MILL ARBOR-1″ DIA. (Long)Holds round mill cutters |
0.23kg
0.5lbs |
£63.20 |
3306 |
STD. HEADSTOCK, DC MOTOR AND SPEED CONTROLComplete, self-contained drive unit with pulleys designed to
turn the spindle at speeds up to 2800 RPM. Alternate pulley position provides more torque and a maximum
spindle speed of 1400 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz. |
4.55kg
10lbs |
£403.20 |
3307 |
10,000 RPM HEADSTOCK, DC MOTOR AND SPEED CONTROLComplete, self-contained drive unit with pulleys
designed to turn the spindle at speeds up to 10,000 RPM. Alternate pulley position provides more torque
and a maximum spindle speed of 2200 RPM. Operates on any current 100VAC to 240VAC, 50 or 60 Hz. |
4.55kg
10lbs |
£504.10 |
3400 |
OVERSIZE HANDWHEEL2.5" diameter for easier cranking |
0.05kg
0.12lbs |
£19.10 |
3420 |
2″ ADJUSTABLE ZERO HANDWHEELMill Y-axis or lathe crosslide |
0.11kg
0.25lbs |
£44.10 |
3440 |
2.5″ ADJUSTABLE ZERO HANDWHEELMill Y-axis or lathe leadscrew |
0.11kg
0.25lbs |
£50.70 |
3460 |
2.5″ ADJUSTABLE ZERO HANDWHEELW/Thrust & Bearing Set for Mill Z-axis |
0.11kg
0.25lbs |
£56.90 |
3480 |
VERTICAL MILLING COLUMN W/ADJ. HANDWHEELTurns lathe into a mill in less than 30 seconds. Normally used
with 4500 or 4400 lathes to match adj. Zero handwheels. |
3.64kg
8lbs |
£214.10 |
3500 |
ROTARY COLUMN ATTACHMENTAllows mill column to be swung up to 90° to either side for angled drilling.
|
0.8kg
1.75lbs |
£101.30 |
3551 |
MILLING VISEHolds work for milling. Looks similar to a drill press vise, but jaw pulls down and in to
keep parts from lifting during milling. Precise jaws and body can be squared up with table. |
1.14kg
2.5lbs |
£94.40 |
3559 |
90° ANGLE PLATEMounts parts 90° to table for milling |
1.82kg
4lbs |
£126.30 |
3560 |
MILL TOOLING PLATEProtects mill table, pre-drilled hole pattern makes it easy to clamp parts, mount mill
vise or rotary table to mill. |
1.14kg
2.5lbs |
£75.70 |
3570 |
ROTATING MILL VISE BASEHolds mill vise while allowing it to be rotated 360° using laser engraved scale
for angle reference |
0.45kg
1lbs |
£126.30 |
3575 |
ROTATING MILL VISE BASE AND MILL VISE (P/N 3551)Save by buying vise and base at same time |
1.14kg
2.5lbs |
£208.20 |
3580 |
MULTI-DIRECTION DELUXE VERTICAL MILLING COLUMNTurns your lathe into an 8-direction mill in 30 seconds
|
5.91kg
13lbs |
£472.50 |
3700 |
4″ PRECISION ROTARY TABLE72:1 worm gear divides a circle into 3600 parts without interpolation. Used for
indexing radial hole patterns or milling radii or indexed flats. Used on 3701 or 3750 to index for cutting
gear teeth. A mill with a rotary table is an extremely potent combination, make virtually any part
possible, with size being the only limitation |
3.64kg
8lbs |
£340.40 |
3700-CNC |
4″ PRECISION ROTARY TABLE, CNC-READYIncludes stepper motor mount ready for application of your own
stepper motor and CNC controls. Handwheel also included |
5kg
11lbs |
£403.20 |
3701 |
RIGHT ANGLE ATTACHMENT (For use with P/N 3700)Mounts rotary table perpendicular to mill table |
1.36kg
3lbs |
£94.40 |
3702 |
RIGHT ANGLE ADJUSTABLE TAILSTOCKFor use with P/N 3700. Aligns with center of rotary table when mounted
on 3701. Supports arbor shaft used to hold gear blanks when cutting teeth. |
0.91kg
2lbs |
£94.40 |
37091 |
12 mm to 3/8-16 ADAPTERAllows Chuck with 12 mm thread to be mounted to Sherline rotary table P/N 3700
|
0.11kg
0.25lbs |
£23.50 |
37092 |
14 mm to 3/8-16 ADAPTERAllows Chuck with 14mm thread to be mounted to Sherline rotary table P/N 3700
|
0.11kg
0.25lbs |
£11.00 |
3750 |
TILTING ANGLE TABLEMount part, mill vise, chucks or rotary table to mill any angle from 0° to 90°. In
90° position, holds rotary table at same height as 3701, eliminating the need for that part |
1.14kg
2.5lbs |
£138.80 |
4017U |
MILL SADDLE LOCKING LEVER UPGRADEAllows Z-axis leadscrew to be locked with a lever on the leadscrew
instead of tightening a screw with a hex wrench. Standard on all mills after 1998 |
0.23kg
0.5lbs |
£31.60 |
4017Z |
CNC MILL ANTIBACKLASH ADJUSTER UPGRADEAllows the Z-axis locking lever to be positioned in partially
locked positions to reduce backlash to as little as .001". Standard on CNC mills after 2/04. Can be
installed as an option on any Sherline mill. |
0.23kg
0.5lbs |
£44.10 |
4150 |
15″ LATHE VINYL COVERProtect your 4000-series lathe from dust and grit |
0.11kg
0.25lbs |
£15.40 |
4151 |
24″ LATHE VINYL DUST COVERProtect your 4400-series lathe from dust and grit |
0.11kg
0.25lbs |
£17.90 |
4335 |
10,000 RPM PULLEY CONVERSIONHigh speed position allows motor to turn spindle at a maximum of 10,000 RPM.
Second belt position provides more torque and a maximum of 2200 RPM. New 2-piece standoff replaces
standard motor standoffs. Installs in about 10 minutes. |
0.45kg
1lbs |
£101.00 |
4360 |
CHIP GUARDClear shield contains flying chips. Pivots out of the way when not needed. Not a substitute
for safety glasses |
0.23kg
0.5lbs |
£19.10 |
4417Z |
CNC LATHE BACKLASH ADJUSTERInstalls on leadscrew to provide a way to reduce backlash during CNC
operations. Similar to the 4017Z lock developed for the mill, it uses a lever which is tightened against
the saddle nut to control backlash. A positioning arm holds the locking lever in any desired position.
Installed on all CNC-ready lathes as of 5/04. Can be installed as an option on any Sherline lathe. |
0.23kg
0.5lbs |
£47.20 |
5011U |
MILL X and Y AXIS STAR GEAR BACKLASH UPGRADEInstalls on mills made after 1997 when the pointer style
backlash lock was replaced with the star gear type lock and up until July, 2004 when this change was
incorporated into regular production. Includes new star gears and leadscrew nuts with finer teeth for mill
X and Y axis plus new button head screws to hold the locking gear. |
0.05kg
0.1lbs |
£12.20 |
5150 |
MILL VINYL COVERProtects your 2000-series mill from dust and grit |
0.11kg
0.25lbs |
£17.90 |
5151 |
MILL VINYL COVERProtects your 2000-series mill from dust and grit |
0.11kg
0.25lbs |
£20.70 |
5200 |
XY BASE (10″) (Inch)Add a 3050 vertical milling column and the motor/speed control from your lathe and
you have a model 5000 mill |
7.73kg
17lbs |
£327.50 |
5200-CNC |
XY BASE (10″) CNC READY (Inch) w/ 2 stepper motor mountsStepper motors and CNC controls not included.
|
9.09kg
20lbs |
£548.20 |
5201 |
XYZ BASE (10″) (Inch)Add the motor/speed control from your lathe and you have a model 5000 mill |
11.82kg
26lbs |
£579.70 |
5201-CNC |
XYZ BASE (10″) CNC READY (Inch) w/ 3 stepper motor mountsStepper motors and CNC controls not included.
|
12.27kg
27lbs |
£894.70 |
5220 |
XY BASE (10″) W/ ADJUST. HANDWHEELSAdd a vertical milling column with adjustable handwheels and the
motor/speed control from your lathe and you have a complete model 5500/5510 mill |
8.64kg
19lbs |
£422.20 |
5230 |
XYZ BASE (10″ W/ ADJUST. HANDWHEELSAdd the motor/speed control from your lathe and you have a complete
model 5500/5510 mill |
11.82kg
26lbs |
£649.10 |
5300 |
HOME MACHINIST’S HANDBOOK by Doug Briney275 pages, B/W, uses Sherline tools in all the setup examples,
project plans included |
0.91kg
2lbs |
£26.30 |
5301 |
TABLETOP MACHINING by Joe MartinThe ultimate miniature machining book by Sherline's owner. All color,
8-1/2 x 11, 400+ photos, 200+ illustrations. Third printing, 11/01 includes 8 more pages and several new
photos. |
1.36kg
3lbs |
£50.70 |
5325 |
SHERLINE TOOLS & ACCESSORIES CATALOG, 6th Edition48-page color catalog shows tools and accessories
plus tells briefly how each is used. Current price lists enclosed. |
0.23kg
0.5lbs |
£3.80 |
5326 |
SHERLINE ASSEMBLY AND INSTRUCTION GUIDE, 4th Edition44-page color instruction book included with new
machines. A good basic course in machining |
0.23kg
0.5lbs |
£3.80 |
5327 |
SHERLINE SHOP GUIDE144 pages, B/W, 8.5 x 11" perfect bound book incorporates illustrated instructions
from all of Sherline's major accessories into one volume. |
1.36kg
3lbs |
£12.50 |
5328 |
STEAM ENGINE VIDEO by Rudy KouhouptVHS, 3 Hrs., includes materials list and printed plans for a steam
engine. Video takes you through every setup from start to finish. |
0.91kg
2lbs |
£88.20 |
5329 |
SHOP SECRETS—USING MEASURING TOOLS by Mike RehmusVHS, 2 hrs., tells you how each measuring tool used in
machining is used and cared for. Very professionally produced. Includes promo for NAMES show too |
0.45kg
1lbs |
£50.70 |
5330 |
SAFETY GLASSESA MUST in every shop. Get them from us or get them from someone else, but don't cut metal
without them! These are good quality and comfortable. |
0.11kg
0.25lbs |
£9.70 |
5401 |
DELUXE XY BASE (Inch) w/ 12″ Base and Adjustable HandwheelsAdd a 3480 vertical milling column and the
motor/speed control from your lathe and you have a complete deluxe model 5400 mill. |
8.64kg
19lbs |
£510.40 |
5401-CNC |
DELUXE XY BASE CNC READY w/ 2 stepper motor mountsStepper motors and CNC controls not included. |
9.55kg
21lbs |
£649.10 |
5420 |
DELUXE XYZ BASE (Inch) w/ 12″ Base and Adjustable HandwheelsAdd the motor/speed control from your lathe
and you have a complete deluxe model 5400 mill. |
12.27kg
27lbs |
£688.20 |
5420-CNC |
DELUXE XYZ BASE CNC READY (Inch) w/ 3 stepper motor mountsStepper motors and CNC controls not included.
|
12.73kg
28lbs |
£945.00 |
5600 |
Model 2000 8-DIRECTION MILL XY BASEAdd a multi-direction vertical milling column and the motor/speed
control from your lathe and you have a complete model 2000 mill. |
10kg
22lbs |
£535.70 |
5625 |
Model 2000 8-DIRECTION MILL XYZ BASEAdd the motor/speed control from your lathe and you have a complete
model 2000 mill. |
15.45kg
34lbs |
£945.00 |
5650 |
8-DIRECTION UPGRADE for all existing SHERLINE MILLSA multi-direction milling column and an offset base
brings your existing mill up to the capabilities of a model 2000 mill. |
4.09kg
9lbs |
£334.10 |
5680 |
8-DIRECTION UPGRADE for LATHE VERTICAL MILLING COLUMNTurns your lathe/vertical milling column
combination into an 8-direction mill. |
4.09kg
9lbs |
£334.10 |
6079 |
1/4″ END MILL HOLDERHolds end mills in 3080 set |
0.23kg
0.5lbs |
£37.90 |
6080 |
3/16″ END MILL HOLDER |
0.23kg
0.5lbs |
£37.90 |
6081 |
1/8″ END MILL HOLDER |
0.23kg
0.5lbs |
£37.90 |
6100 |
HORIZONTAL MILLING CONVERSION |
5kg
11lbs |
£163.80 |
6101 |
COLUMN CONVERSIONTo optimize the horizontal conversion, P/N 6100, the mill column should be reworked to
allow for the best set up. Contact SHERLINE for information. |
3.64kg
8lbs |
not known |
6700 |
CNC UPGRADE KIT, 5000 OR 5400 MILLReplaces the handwheels with stepper motor mounts, ready for the
installation of your own stepper motors and CNC control. |
1.14kg
2.5lbs |
£315.00 |
6705 |
CNC UPGRADE KIT, 2000 MILLReplaces the handwheels with stepper motor mounts, ready for the installation
of your own stepper motors and CNC control. |
1.14kg
2.5lbs |
£337.50 |
67127 |
STEPPER MOTOR2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, pre-wired with plug for use
with Sherline rotary or linear controller, flats pre-machined for Sherline coupler and handwheel set
screws. |
0.45kg
1lbs |
£94.40 |
67130 |
STEPPER MOTOR2 amp, #23 Frame, dual shaft, 6-wire, 136 oz-in stall torque, 6-wire plug-in harness with
raw leads for use on applications that do not have the Sherline 5-pin connector plug, flats pre-machined
for Sherline coupler and handwheel set screws. |
0.45kg
1lbs |
£81.90 |
6720 |
CNC UPGRADE KIT, 4000 or 4500 LATHEReplaces the handwheels with stepper motor mounts, ready for the
installation of your own stepper motors and CNC control. |
0.91kg
2lbs |
£269.10 |
6730 |
CNC UPGRADE KIT, 4400 LATHEReplaces the handwheels with stepper motor mounts, ready for the installation
of your own stepper motors and CNC control. |
0.91kg
2lbs |
£282.50 |
6740 |
CNC UPGRADE KIT, 5000 and 5400 Series Mills, Z-axis only |
0.68kg
1.5lbs |
£132.50 |
6750 |
CNC UPGRADE KIT, 2000 Series Mills, Z-axis only |
0.68kg
1.5lbs |
£132.50 |
6760 |
CNC UPGRADE KIT, mill X axis or lathe Crosslide only (all models) |
0.45kg
1lbs |
£94.40 |
6770 |
CNC UPGRADE KIT, mill Y axis only (all mill models) |
0.45kg
1lbs |
£94.40 |
6780 |
CNC UPGRADE KIT, leadscrew axis only, 4000/4500-series lathes |
0.45kg
1lbs |
£175.00 |
6790 |
CNC UPGRADE KIT, leadscrew axis only, 4400-series lathes |
0.45kg
1lbs |
£188.50 |
7506 |
SET OF MACHINIST’S PARALLELSSets of two parallel bars in five different sizes sized for miniature
machine tools. Used to support work a known distance above and parallel to the table. |
0.11kg
0.25lbs |
£63.20 |
7550 |
Super-Lube multi-purpose synthetic grease with Syncolon® (PTFE), 3 oz tubeTeflon-based grease that we
use at the factory on all new machines. Clear, non-staining, heat resistant. |
0.11kg
0.25lbs |
£10.40 |
7555 |
Super-Lube dri-film spray lubricant with Syncolon® (PTFE), 11 oz aerosol canTeflon-based film that
sprays on. Once propellant dries, it leaves a thin coat of dry lubricant that won't attract chips. |
0.45kg
1lbs |
£18.80 |
7600 |
3/8″ INSERT HOLDER TOOL POSTHas side slot to hold 3/8" shank cutting tool holders plus a 3/8" round hole
to hold round boring bars. |
0.11kg
0.25lbs |
£25.40 |
7610 |
55° NEGATIVE RAKE INSERT HOLDER w/ insertHolds carbide tips for cutting hard materials like stainless
steel. 5° angle provides negative clearance for the cutter, which is supported all the way down to the
table for rigidity. |
0.23kg
0.5lbs |
£75.70 |
7612 |
REPLACEMENT 4-SIDED CARBIDE INSERT TOOL (for 7610) |
0.03kg
0.06lbs |
£20.00 |
7620 |
SINGLE FLUTE INSERT FLY CUTTERCarbide insert cuts hard materials. Also is a good compromise between a
fly cutter and an end mill, because it will cut a 1-1/8" wide path while still being able to cut right up
to a shoulder. |
0.23kg
0.5lbs |
£75.70 |
7622 |
REPLACEMENT 2-SIDED CARBIDE TIP (for 7620) |
0.03kg
0.06lbs |
£20.00 |
8100 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR MILL (inch)Reads table position to .0005", electronic
compensation for backlash |
1.36kg
3lbs |
£472.50 |
8200 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE (inch)Reads table position to .0005", electronic
compensation for backlash |
1.36kg
3lbs |
£409.40 |
8210 |
3-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE and VERTICAL MILLING COLUMN (Inch)Reads table position to
.0005", electronic compensation for backlash |
1.36kg
3lbs |
£485.00 |
8220 |
2-AXIS DIGITAL READOUT w/ RPM GAGE FOR LATHE without READOUT BOXFor those who already have a Mill DRO
package. (Inch) Reads table position to .0005", electronic compensation for backlash. |
0.91kg
2lbs |
£207.90 |
8240 |
Z-AXIS VERTICAL MILLING COLUMN DIGITAL READOUT HANDWHEEL PACKAGE (Inch)Adds third readout for those who
bought 2-axis DRO and later add a vertical milling column. |
0.23kg
0.5lbs |
£91.00 |
8700 |
CNC ROTARY INDEXER w/ CONTROLLERCNC ROTARY INDEXER w/ CONTROLLER, STEPPER MOTOR, MOUNT, POWER SUPPLY,
CABLES, 4″ ROTARY TABLE AND HOLD-DOWNS (Inch) |
7.73kg
17lbs |
£913.80 |
8710 |
CNC ROTARY TABLE RISER PLATEOn the 3700-CNC and 8700 CNC rotary tables, the bottom of the stepper motor
mount extends slightly below the bottom surface of the table. On Sherline mills, the mount overhangs the
side of the table so this is not a problem. On larger mills or flat table applications a riser plate is
needed so that the stepper motor clears the table surface. |
0.91kg
2lbs |
£37.90 |
8730 |
CNC ROTARY TABLE WITH STEPPER MOTORStepper motor plugs into 4th axis cable of 8760 driver box or
Sherline 8540 or 8020 CNC system to act as 4th axis. Includes prewired plug. |
4.55kg
10lbs |
£497.90 |
8760 |
CNC 4-AXIS DRIVER BOXIncludes 4 cables for X, Y, Z and A (Rotary) axes, power supply and parallel cable
for attachment to computer's printer port. Linux OS and EMC 4-axis softare also included on two CD's. Buy
or upgrade a CNC-ready Sherline machine, buy the needed P/N 67127 stepper motors, plug in and attach to
your computer with Linux/EMC installed and you have the duplicate of a complete Sherline CNC system. NOTE:
one hour of free technical support provided with Sherline CNC system is NOT provided when driver box is
purchased separately. |
3.18kg
7lbs |
£807.20 |
8765 |
Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.)Save compared to complete systems
with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT
include software installation and technical support. |
4.09kg
9lbs |
£982.20 |
8770 |
Upgrade any CNC-ready Sherline lathe to CNC (Computer not included.)Save compared to complete systems
with computer. Includes 2 stepper motors, 4-axis 8760 driver box and Linux/EMC software on CD. Does NOT
include software installation and technical support. |
4.55kg
10lbs |
£1,083.20 |
8800 |
CNC LINEAR CONTROLLER w/ STEPPER MOTOR (Inch)Stepper motor bolts onto Sherline CNC-ready stepper motor
mounts. Controller drives stepper motor to move any axis on lathe or mill. From .0005" to 9.9995". Will
work on any lathe or mill axis that already has a stepper motor mount installed. Includes power supply and
cable. Can be daisy chained with other Sherline linear or rotary controllers. |
2.27kg
5lbs |
£605.40 |
8850 |
CNC MILL OR LATHE POWER FEEDReplaces handwheel on X- or Y-axis of mill or lathe crosslide with stepper
motor mount and stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to
allow movement from .0005" to 9.9995". Includes drill block for locating mounting holes. Can be daisy
chained with other Sherline controllers |
2.73kg
6lbs |
£656.30 |
8860 |
CNC MILL POWER FEEDReplaces handwheel on Z-axis of mill with stepper motor mount and stepper motor.
Motor is driven by self-contained computer/keypad unit and power supply to move Z-axis in programmable
.0005" increments up to full length of travel. Includes drill block for locating mounting holes. Can be
daisy chained with other Sherline linear or rotary controllers. |
3.18kg
7lbs |
£642.50 |
8865 |
CNC MILL POWER FEEDSee description for 8860. |
3.18kg
7lbs |
£642.50 |
8870 |
CNC LATHE LEADSCREW POWER FEEDReplaces handwheel on long leadscrew of lathe with stepper motor mount and
stepper motor. Motor is driven by self-contained computer/keypad unit and power supply to move the saddle
from .0005 to 9.9995". Includes drill block for locating mounting holes. Can be daisy chained with other
Sherline linear or rotary controllers. |
3.18kg
7lbs |
£699.40 |
8880 |
CNC LATHE LEADSCREW POWER FEEDSee description for 8870 above. |
3.18kg
7lbs |
£713.20 |